Power Sensor Heads for FieldMaxII-TOP
MCO.00OP2.VIS (<0.05W)
High-Sensitivity Photodiode Sensor
This high-sensitivity semiconductor sensor is ideal for cw laser measurement in the wavelength range between 400 and 1100nm in the nW to low mW level. For linear operation up to 5W an attenuator is offered.
Highlights:
• 0.4 – 1.06µm Wavelength Range
• Option: 1000:1 Attenuator
• Si-Photo diode
MCO.0PM10.00 (<10W [30W] )
Air-Cooled Thermopile Sensor
This thermopile sensor is used to measure cw and pulsed lasers from 10mW to 10W average power. The sensor is cooled by air convection and calibrated at 514nm.
Highlights:
• Max. power / energy: 10W (30W @ < 5min) / 10J
• Spectral flat between: 0.19 - 11µm
• Resolution: 1 to 10mW
• Entrance aperture: Ø 19mm
MCO.PM150.00 (<150W [300W])
Air-Cooled Thermopile Sensor
This thermopile, spectral flat sensor is used to measure cw and pulsed lasers of up to 150W. The sensor is cooled by air convection.
Highlights:
• Max. power / energy: 150W (300W @ <5min) / 150J
• Spectral flat between: 0.19 - 11µm
• Resolution: 30mW
• Entrance Aperture: Ø 19mm
MCO.PM30V.10 (<30W)
High-Peak-Power Thermopile Sensor
This sensor is designed for use with high-peak-power, low rep rate (10Hz), q-switched Nd:YAG lasers. The volume-absorbing substrate can be easily replaced. A quartz diffusur is integrated.
Highlights:
• Wavelength range: 0.266 – 3 µm
• Power range: 100mW – 30W
• Max. energy density: 2J/cm2, 1064nm, 10ns
Specifications of Power Sensor Heads
|
| Parameter | MCO.00OP2.VIS | MCO.0PM10.00 | MCO.PM150.00 | MCO.PM30V.10 |
| Wavelength range | 0.4 - 1.06µm | 0.19 - 11µm | 0.19 - 11µm | 0.25 - 3µm |
| PowerMin | Max | 10nW - 50mW | 10mW - 10W | 300mW - 150W | 100mW - 30W |
| Max. intermittent power (<5min) | - | 30W | 300W | 50W |
| Max. Power density | - | 26kW/cm2 | 26kW/cm2 | 50W/cm2 |
| Max. Energy density | - | 0.6J/cm2;
1064nm; 10ns | 0.6J/cm2;
1064nm; 10ns | 2J/cm2;
1064nm; 10ns |
| Response time | - | 2s | 2s | 3s |
| Detector type | Silicon-PD | Surface absorbing | Surface absorbing | Volume absorbing |
| Resolution | 1nW | 1mW | 30mW | 10mW |
| Energy (long pulse) | - | 0.5 - 10J | 1 - 150J | - |
| Detector diamete | 7.9mm | 19mm | 19mm | 19mm |
| Coating | - | broadband | broadband | - |
| Calibration | alle | 514nm | 514nm | 514nm |
| Calibration uncertainty | ± 5% | ± 1% | ± 1% | ± 1% |
| Cooling | Air | air | air | air |
| Dimensions | Ø 29 x 54mm | Ø 63 x 36mm | Ø 150 x 118mm | Ø 101 x 56mm |
