P1012

Laservision Laser Safety Magnifier with Filter Type P1012

The Laser Safety Filter P1012 is a light green absorbing laser protection filter without additional reflective coating. The protection is based on absorption of the laser light within the bulk material. The laser safety filter has a very high daylight transmission of 65% and therefore a very good visual brightness as well. The laser safety filter LASERVISION P1012 is CE certified and especially suitable for different laser diodes (810/940/980nm) and Nd:YAG lasers. Please calculate required protection levels before using laser safety filters and compare with the filter provided.

Filter Specification for P1012

Filter	P1012
	Full Protection
Colour	light green
Filter Material	Plastic
Filter Technology	Absorption Filter
Certification	DIN GS
VLT (approx.)	60%
Visual Brightness	very good
Colour View	good
Filter Thickness	approx. 2 mm*
View of the spectrum as seen through the filter***


View of the spectrum without the filter

Transmission Curve**

Highlights

Protection levels acc. to EN 207
Especially suitable for Nd:YAG Laser and pump diodes
Very good colour view and high VLT
Available also with Magnifying Loupe #320

Available Frame Styles and Protection Levels with Filter P1012

^{(for frame details, please click on the picture below)}

: LASER LOUPE

Frame	Laser Loupe
Part number	320.P1012.324
DIR 810 - <940	L3 (OD 3+)
DIR 940 - <980	L4 (OD 4+)
D 980 - 1064	L5 (OD 6+)
I 980 - 1064	L5 (OD 6+)
R 980 - 1064	L5 (OD 6+)