laser safety film with lamination
The IR window film from laservision features an OD2+ within the area of 980-3,000nm in order to protect against scattered laser light. The window film is laminated as a service by a qualified provider. If the lamination is both-sided the OD is double. For a final assessment of costs please contact laservision because of further technical specialties, such as staging costs, travel expences and or removing of old surfaces). The stated pricing is a flat charge for areas <3m² without consideration of additional costs.
- Order number: 000P5P141001
- GTIN: 4050369029620
- Pack unit: 1 pieces
Laboratory or OR (operating room) windows need to be shielded against laser radiation in order to protect exterior areas from direct or scattered laser light. This is in particular true for the application of infrared lasers, because their radiation is invisible for the human eye. Especially for such application laservision has qualified a blue-green, absorbing plastic film. This new laser protection film P5P14 has a daylight transmission of approx. 55% and is specified with OD (Optical Density) values only. Assessment of costs is based on meters with a standard width of approx. 1,50m. Lamination is offered as a service by a qualified provider and will be charged at cost.
The instructions for use can be found here.
Highlights
- laser safety film with high transmisstion/VLT (55%)
- very good colour view
- OD 2+ at 980-3000nm
- double OD if lamination is both-sided
- add. UV-protection (180-380nm OD6+)
- lamination is a service by default
Protection in the infrared spectral range above 1400nm
Protection within the ultraviolet spectral range between 180 and 400nm
| Protection range: |
Infrared
ultraviolett |
| Protection Class / Norm: |
EN 60825
|
| Colour: |
light blue
|
| Dimension (mm): |
Width 1500mm
|
| Properties: |
IR laser protection film
|
| VLT (approx.): |
55%
|