The single-layer laser safety curtain BC7.F1P01.1201 is approx. 900mm wide and 2,000mm high. The individual segments have a preferred direction and are provided with an additional covering made of white ESD-compatible textile material (vendor proofed according DIN EN 1149-1) and are connected to each other by means of elastomeric tape. The suspension is via an eyelet at the top. The length (height) of the tracks can be customized. The curtain is certified according to EN12254.
The laser safety curtain CR, SHELTER LIGHT is suitable for mid-range laser power, but is covered in an additional layer of grey, antistatic fabric (tested acc. DIN EN 1149-1) with respect to the laser safety curtain, SHELTER LIGHT. Our curtains are available in standard widths of 900 mm and 1800 mm and in a variety of different standard lengths (see below). Additionally, our standard curtains can be shortened free of charge. Other sizes up to a size of (WxL) 2700 mm x 3500 mm and special forms are available on request.
As always with our curtains, there are eyelets on the upper rim and individual curtains CR can be attached to each other with a special connector band to create any width needed. To complete the laser safety curtain, it is certified according to EN 12254. It is a new version of the well-known laservision SHELTER-family.