The laservision laser safety window 000.P1P21.2001 (with a thickness of approx. 3-3.2mm) is a gold-colored laser protection window with a scratch-resistant coating. Due to the high ODs in the UV and blue range (OD10+ von 180 – 315 nm; OD8+ >315-464nm), the broad and high protection level within the NIR (OD5+ bei 815nm; OD8+ bei 880nm, eine OD10+ von 940-1055nm) and in the infrared (OD8 + from 5230 - 14570 nm), the window is suitable for blue high power diodes as well as for disk, Nd: YAG, fiber or with CO2 lasers. The gold-colored laser safety window is 200x100mm in size and has good color vision and VLT of appr. 47%. It is customer-specific available up to a standard size of 1219x915mm. The maximum size can be 2000 x 1150mm. The thickness is about 3mm.
The laser safety window P1P21 consists of a light gold-colored, absorbing plastic with a scratch-resistant coating and a thickness of 3-3.2mm. The protection is based on the absorption of laser radiation in the material itself. The window has a daylight transmission of approx. 50% and therefore a very good visual brightness and good color recognition.
To ensure safe use in a wide range of conditions, small and large beam diameters in machines or enclosures. The P1P21 laser safety window is certified according to DIN 207, EN 12254 and 60825-4.
Especially the following protection levels are of particular note:
DIN 207: 10s: >315-464nm D LB6 + IR LB8 + M LB8Y
880-1075nm D LB6 + IR LB8 + M LB8Y
EN12254: 100s: >315-464 D AB6 + I AB8 + R AB7 + M AB8Y
940-1050nm D AB7 + I AB8 + R AB7 + M AB8Y
>1050-1075nm D AB6 + I AB8 + R AB7 + M AB8Y
For adequate laser safety, please calculate the OD values and protection levels required for your laser and compare them with the information on the laser safety window before installing the window.
Protection in the infrared spectral range above 1400nm
Protection within the near infrared spectral range between 700nm and 1400nm
Protection within the ultraviolet spectral range between 180 and 400nm
Protection within the visible spectral range between 400 and 700nm
Achtung: Die folgenden Daten werden auf Basis der EN 12254 sowie der ca. Messwerte aus den offiziellen Prüfberichten angegeben. Ergebnisse können bei Wiederholung aufgrund andersartigem Prüflaser/-aufbau/-durchführung abweichen. Es gelten ausschließlich die zertifizierten Schutzstufen.