Basic system

With the basic system you can fix the laser protection plates directly within the grid with the screw columns (TTS.POST1.1001) or you can set them up freely on the table with a magnetic column (TTS.POST1.1002). A magnetic optical table is required to use the magnetic columns. Both column variants have been tested by laservision and offer a SGB of 1.25 MW / m² @ 940-1400nm for a maximum service life of 105s. The barrier material M7P06 is particularly suitable for the NIR range (780-1400 nm) and is certified with an SGB of 960 KW / m² according to 60825-4.

Highlights

laservision Table Top System (TTS)

Maximum flexibility of the structure
Can be mounted with screw columns on tables with 25mm grid and M6 holes
Can be freely placed on magnetic tables with magnetic columns
Tested and certified according to DIN EN 60825-4
Can be combined with on-the-table and foldable-edge systems to a limited extent

Highlights

Maximum flexibility of the structure
Can be mounted with screw columns on tables with 25mm grid and M6 holes
Can be freely placed on magnetic tables with magnetic columns
Tested and certified according to DIN EN 60825-4
Can be combined with on-the-table and foldable-edge systems to a limited extent

laservision Table Top System (TTS)

Available basic system modules

TTS.M7P06.100x basic module

available standard sizes (mm): 306 x 383 x 6mm

The laser protection plates (M7P06) can be fixed directly on the OT with the corresponding columns. Especially for IR lasers. Buy from laservision!

TTS.POST1.1001 standard column with M6 thread

The standard column TTS.POST1.1001 is mounted directly in the drilling grid of the OT by means of an M6 grub screw. Buy from laservision!

TTS.POST1.1002 magnet column

The magnetic column TTS.POST1.1002 can be placed freely on a magnetic OT by means of a strong neodymium magnet. Buy from laservision!